EOC PON Products--UVINS

- Products - EOC PON Products - Outdoor Active EOC Master

Introduction
Features
Technical
Send Inquiry

As an EoC office equipment based on HOMEPLUG AV, UVE-502 provides one EoC connector, one gigabit Ethernet port, and two RJ45 ports (one for console management and the other for device management). UVE-502 outputs mixed signals to coaxial cable distribution network and works with CNU, to form a solution scheme for last-one-hundred-meter high-speed Internet access network. This scheme achieves NGB (Next Generation Broadcasting Network) user broadband access and helps to bidirectionally reform cable television network broadband and make full use of existing broadband resources.

* Support connecting to max of 128 terminal

* Support long distance transmission and built-in high performance filter module

* Provides and uplink GE port,a 10/100BASE-T port for device management and an Ethernet

port for console management

* Support a maximum physical transmission rate of 600Mbps

* Provides one EOC module,two CATV input port and two cable output ports

* Support modulation frequency in a range of 7.5MHz to 65Mhz without interference to the existing CATV signals

* Support VLAN(802.1Q),QoS(802.1p) and 1GMP protocols

* Support SNMP/WEB/CLI management

System spec
Chipset	AR7410, Opulan06750, AR8328N
Protocol	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3u, IEEE 802.3x,IEEE 1901 HTTP, SNMP, TELNET
Physical Rate	600 Mbps
Modulation Frequency	7.5 MHz — 67.5MHz
Max. Number of Connected Terminals	128
Modulation Mode	OFDM, 4096/1024/256/64/16 QAM, QPSK, BPSK
Encryption Mode	128-bit AES
VLAN	4K
Port Rate Restriction	A minimum of 64 kbps
QoS	Support VLAN priority Support CoS packet classification Support ToS(DSCP)packet classification
Operating Mode	CSMA/CA
Multicast Supported	Support IGMP managing multicast sessions
Management Method	Support SNMP, WEB, and CLI management
Port Spec
Ethernet Port	2 x RJ45 for management, 1 x GE uplink port
Coaxial Cable Port	4 x F-type female ports (metric or imperial) for inputting CATV signals and outputting mixed signals.
PON Port	1 x optical port for connecting to data network
LED	Power indicator Diag: Indicator for diagnosis Link: Link status indicator GE: GE port status indicator
RF Spec
Impedance	75 Ω
Transmitting Power	0±3 dBm
Reflection Loss	> 16 dB
Insertion Loss	< 1.2 dB
Receiving Sensitivity	-65dBm
General
Max. Power Consumption	≤10W
Power	220V
Operating Temperature	-30ºC—60ºC
Storage Temperature	-40ºC—75ºC
Humidity	Operating10%—90%, non-condensing ,Storage Humidity 5%—90%
Physical Size	LxWxH: 233 mm x 192 mm x 102 mm
Weight Green Standard	2kgs RoHs

Solution Reference

EOC Practical Solution