- Introduction
- Features
- Technical
- Send Inquiry
Optical Switch is mainly used to back up two or more optical input singal in CATV optical fiber network, it can auto-switch to backup signal when the main signal input broken to make sure optical fiber network running normally.
> Adpots high performance optical switch component
> Auto-dectecting circuit design to moninor all signal input and realize auto/manualy switch input signal function
> Auto-dectecting all status of the machine and display working status on VFD;
> NMS and SMS both support
|
Items |
Unit |
Technique Parameters |
|
Wavelength |
nm |
1200-1600 |
|
Insertion Loss |
dB |
≤1.3(Test on 1310nm、1490nm、1550nm points) |
|
Switch Time |
ns |
≤ 5 |
|
Return Loss |
dB |
≥ 55 |
|
Max optical input level |
mW |
500 |
|
Input optical power range |
dBm |
-15 - +24 |
|
RF test optical signal range |
dBm |
-2 - +24 (enhancement mode) |
|
Switch life |
|
≥1000 ten thousand times |
|
Optical connector |
|
FC/APC or SC/APC |
|
Operating Temperature |
℃ |
-5 - +55 |
|
Storage temperature |
℃ |
-30 - +70 |
|
Relative Humidity |
% |
Max 95%No Condensation |
|
Consumption |
W |
≤ 2 |
|
Supply Voltage |
V |
AC160V - 250V （50 Hz） |
|
Dimension |
mm |
483（L）X 270（W）X 44（H） |
-
Triple play of GEPON/EPON+CATV network
-
CATV+GEPON Solution
-
Single Fiber Based FTTH Triple Play Access Solution
-
Optical Switch
