CATV Transmission Equipment--UVINS

- Products - CATV Transmission Equipment - 1310nm Optical Transmitter with dual power supply

Introduction
Features
Technical
Send Inquiry

UVOT-B Series 1310 nm Optical transmitter is primarily used for TV video signal, digital TV signal, telephone voice signal and data (or compressed data) signal long-distance fiber transmission in HFC network. By using dual Hot-Plug power supply and adopting original high performance DFB laser transmitter as light source, RF drive adopting RF power digital automatic process technique and advanced RF pre-distortion circuit, and built-in perfect microprocessor automatic monitor system, it insures the excellent function of the product.

Technical Specification:

Items	Unit	Technique Parameters
Output Optical Power	mW	4	6	8	10	12	14	16	18	20	28
Optical Link Loss	dB	7	9	10	11	11.2	11.8	12	12.4	13	14.4
Optical Wavelength	nm	1310±20
Laser Type		DFB Laser
Optical Modulating Mode		Directly Optical Intension Modulation
Optical Connector Type		FC/APC or SC/APC
Frequency Range	MHz	47～750/862
Input Level	dBμV	Indoor：72～88；Outdoor：75～85
Flatness in Band	dB	±0.75
Input Impedance	Ω	75
Input Return Loss	dB	≥ 16（47～550）MHz；≥ 14（550～750/862MHz）
C/CTB	dB	≥ 65
C/CSO	dB	≥ 60
C/N	dB	≥ 51
AGC Controlled Range	dB	±8
MGC Controlled Range	dB	±8
Supply Voltage	V	AC 160V～250V（50 Hz）
Consumption	W	30
Operating Temperature	℃	Indoor：-5～+55；Outdoor：-40～+65
Storage Temperature	℃	-20 ～+65
Relative Humidity	%	Max 95%No Condensation
Dimension	mm	Indoor：483（L）X 380（W）X 44（H）
Dimension	mm	Outdoor：550（L）X 280（W）X 218（H）

Under Testing In The factory:

Ready for Shipment:

* Dual Hot-Plug Power supply available

* Use the international famous brand high performance DFB laser with narrow spectrum, good linearity and high output power.

* RF drive adopting RF power digital automatic process technique, can according to level of input RF signal and number of channels (15-48 channels), automatically processing drive level power, making the C/N, CTB and CSO always in best worth, insure product function; and be steady of output level.

* Advance multi-frequency RF pre-distortion technique with arsenide kalium component availably improves CTB and CSO, the most important parameter of CATV, and heightens C/N at the same time.

* Built-in perfect microprocessor automatic monitor circuit can real-time accurately monitor optical output power and temperature of the laser insure stable optical output power, and prolongs work life of the laser availably.

* Built-in blue VFD monitor on front panel can accurately display the equipment's each work status parameter, and can display error message when the equipment breaks down, make maintenance and fix more convenient.

* With RS232 and RJ45 ports,SNMP available

Items	Unit	Technique Parameters
Output Optical Power	mW	4	6	8	10	12	14	16	18	20	28
Optical Link Loss	dB	7	9	10	11	11.2	11.8	12	12.4	13	14.4
Optical Wavelength	nm	1310±20
Laser Type		DFB Laser
Optical Modulating Mode		Directly Optical Intension Modulation
Optical Connector Type		FC/APC or SC/APC
Frequency Range	MHz	47～750/862
Input Level	dBμV	Indoor：72～88；Outdoor：75～85
Flatness in Band	dB	±0.75
Input Impedance	Ω	75
Input Return Loss	dB	≥ 16（47～550）MHz；≥ 14（550～750/862MHz）
C/CTB	dB	≥ 65
C/CSO	dB	≥ 60
C/N	dB	≥ 51
AGC Controlled Range	dB	±8
MGC Controlled Range	dB	±8
Supply Voltage	V	AC 160V～250V（50 Hz）
Consumption	W	30
Operating Temperature	℃	Indoor：-5～+55；Outdoor：-40～+65
Storage Temperature	℃	-20 ～+65
Relative Humidity	%	Max 95%No Condensation
Dimension	mm	Indoor：483（L）X 380（W）X 44（H）
Dimension	mm	Outdoor：550（L）X 280（W）X 218（H）

Solution Reference

Triple play of GEPON/EPON+CATV network
CATV+GEPON Solution
Single Fiber Based FTTH Triple Play Access Solution